Neer Enterprises Pvt. Ltd. offer State-Of-The-Art industrial
ice making plant right from the plant layout, designing of the
plant, manufacturing customized plant machinery, to meet exact
requirements of the plant backed by prompt customer support.
Neer Enterprises Pvt. Ltd. offers Ice Making
Plant with capacity of 5 Tons to 500
Tons and more Ice per day.
Ammonia compressors designed with
state-of-the-art technology for industrial & commercial
refrigeration and low temperature applications.
Compressors are V belt driven and are
suitable to operate with Ammonia (NH3)
& Freon [12 (CCl2F2),
22 (CHClF2)] as
refrigerant.
Robust construction, excellent performance
and power saving features and hallmarks of the products.
Condensers / Heat Exchangers :
Condenser is a heat transfer surface,
generally which are divided in to three types.
Air Cooled Condenser : Employ air as the condensing medium.
Water Cooled Condenser : Utilize water to condense the
refrigerant.
Evaporative Condenser : Use both air and water as the
condensing medium. The function of the air is to increase the
rate of evaporation by carrying away the water vapor results
from evaporation process.
Ammonia Receiver :
Ammonia receiver can control the supply and
demand relation between the condensers and the evaporator,
prevent excessive liquid ammonia from staying in the
condenser, maintain a certain level in the liquid receiver to
prevent gas from going into the liquid pipe line.
The ammonia in the system can be stored in
the ammonia receiver to avoid loss of the ammonia before the
refrigerating system is repaired. Therefore, the volume of the
ammonia storage should be considered before buying it.
Cooling Coil / Evaporator :
Cooling Coil / Evaporator is used as heat
transfer surface in which a volatile liquid is vaporized for
the purpose of removing heat from refrigerated space.
V shape cooling coils are available in
different sizes, usually custom made to the individual
applications.
Chilling Tank :
Chilling Tank consists of three parts:
1) Ice Tank
2) Insulation of Ice Tank
3) Ice Block
Ice Tank:
Ice tanks are made of such material as wood, steel or concrete.
As wooden tanks do not last long enough and are liable to leak,
they should preferably be made of steel well coated with
waterproof paint. Tanks made of reinforced concrete are also
recommended as superior to those of wood.
The ice tank contains the direct expansion coils, equally
distributed throughout the tank and these coils are submerged in
brine. The tank is provided with a suitable frame of hard wood
for support the ice cans and a propeller or agitator for keeping
the brine in motion: the brine in the tank acts as a medium of
contact only, the ammonia evaporating in the ice coils extracts
the heat from the brine, which again absorbs the heat for the
water in the cans.
The tank itself should not be much larger than is necessary to
hold the cans, the coils, and the agitator. About two inches
should be left between the moulds and three inches between the
pipes and the moulds.
Insulation of Ice Tank:
Insulation of the ice tank is accomplished by using twelve to
eighteen inches of good insulating material on each of the sides
and not less than twelve inches under the bottom.
Ice Block:
Commercial sizes of Ice cans vary with the
weight of ice cakes required. The cans are made to contain about
5% more than their rated capacity to compensate for thawing.
Size of Ice
Dimensions
Size of Band
Plain or Grooved
Gauge of Steel, Galv.
Weight per Can
Gauge of Steel, Galv.
Weight per Can
Width
Length
Height
50
6
12
28
1.5
Plain
18
25
-
-
50
8
8
31
1.5
Plain
18
25
-
-
100
8
16
32
1.5
Plain
16
36
-
-
300
11
22
48
1.5
Grooved
16
72
14
88
300
11
22
49
1.5
Grooved
16
74
14
90
300
11
22
50
1.5
Grooved
16
75
14
91
300
11.5
22.5
44
1.5
Grooved
16
69
14
84
300
11.5
22.5
46
1.5
Grooved
16
72
14
88
300
11.5
22.5
47
1.5
Grooved
16
73
14
89
400
11
22
63
2
Grooved
14
113
12
153
400
11.5
22.5
57
2
Grooved
14
106
12
146
Paneling
(Electrical Equipments) :
The Neer Ice making plant is furnished with electrical
control panel with compressor starter, all necessary safety
switches and pressostats, Voltmeter,
Ammeter, Temperature Sensor etc.
How we operate:
Applications:
Ice Making plants are used in different
applications like :
Fisheries
Hospital
Chemical
Pharmaceutical
Commercially used in different industrial
applications
